How to get the right temperature that is ‘Not Too Hot or Not Too Cold.’ 

Goldilocks and the Three bears is a tale about comfort. It took a few tries and disappointments before she figured out the most suitable temperature for her meal. Unlike Goldilocks, several resources like the internet allow consumers like you to research the best way to meet your requirements and be comfortable in your home without having to undergo too much trial and error. A flawlessly functioning HVAC system is essential for achieving the best level of home comfort. When the thermostat or the HVAC system does not work correctly, contact an HVAC repair technician. 

Some homeowners complain about hot and cold spots.

Your HVAC or duct system might be malfunctioning if the temperature is not even. Here are some different factors to look for when a particular room in your home is hotter or colder than others, without any reason: 

 

• Unbalanced HVAC systems
• Vents and register e obstructions
• Air leaking around windows and doors.
• Inefficient and poor ductwork

 

This guide will explain why there are hot and cold spots, and how to correct them. If you cannot find the source of the problem, consult a reputable HVAC repair technician. Here are some common causes of temperature imbalances:

 

Thermostats Installed In The Wrong Location 

 

Temperature is generally controlled in rooms with thermostats. 

Temperature is harder to control in a room further away from the thermostat. Once it is set, the apparatus will run until a comfortable room temperature is achieved.

The location of your thermostat is important because it cannot determine what temperature was reached in the next room down the hall. Do not place it near sunlight, lamps, vents, windows, or doors, which can cause false readings.

Consider zoning solutions. Zoned HVAC systems could be right for your home, depending on its configuration. Zoned rooms are equipped with multiple thermostats. Having the ability to customize the comfort levels means a more consistent climate and airflow throughout the home.

 

Inefficient And Poor Ductwork

 

One or more rooms in your home may be experiencing hot and cold spots due to poor interconnecting ductwork and issues with ductwork sizing or leaks. Airflow is hampered when the ductwork for your home is the wrong size.

An experienced professional can evaluate your ductwork and determine if it has been sized incorrectly. Poor airflow also results from ductwork leaks. More than 30 percent of your conditioned air can be vented out the ductwork because of leaks.

An efficient duct system ensures consistent temperatures throughout the home. We recommend that you use mastic sealant instead of duct tape for DIY air duct sealing because duct tape quickly peels. In addition to mastic sealant, you may also use aluminum foil tape specially designed for use with air conditioners and heaters.

 

Windows That Are Not Tightly Sealed

 

Make sure windows and doors do not have air leaks. Windows can also pose an issue in ensuring your house has the right temperature. Heat enters your home through windows.  Additionally, if the windows aren’t sealed tightly, you may lose heat when you need it most. Installing heat-resistant film on the windows or solar screens to filter out the heat can improve the insulation.

When the temperatures are at their highest during the hottest part of the day, curtains and drapes can help prevent heat from transferring into your home from your windows. Keep curtains closed on windows that face the sun.

A great way to save energy is to add blinds and shades as they help in reducing hot and cold spots. Air leaks in windows can be detected by a professional. If you have air leakages, you may repair them using caulk, foam sealant, or weatherstripping. Seek advice from a professional HVAC technician. Investing in energy-efficient windows can be quite costly, but they may also prove worthwhile.

 

Closed Vents 

 

There are numerous ways to find out whether vents are the source of your hot or cold spots. Air won’t be able to reach the room if the vents are closed. Keeping your air supply vent closed won’t reduce your heating and cooling bills. In fact, you’ll lose airflow into the room, which could destroy your HVAC system.

Therefore, you should always leave air vents and registers unobstructed and free from dust and debris. If you find anything blocking your vents, such as furniture, drapes, or rugs, get those cleared away. Solve temperature imbalances by checking for closed supply vents and registers. 

 

Poorly Insulated Rooms

 

In homes with poor insulation, heat or cold can be difficult to maintain. As a result, your system will run for a long time and still not provide the desired level of comfort. Consequently, the energy bill may be higher.  The professional can tell you how well insulated your home is and what you can do to improve it.

The problem of poor insulation is seen more frequently in older homes. Read about the Pros and Cons of Different Types Of Insulation. To improve insulation performance or determine your energy consumption, you should schedule a consultation.

 

Pacific Aire Heating & Air Conditioning provides a wide range of HVAC repair services.

For any concerns about temperature imbalances in your home, let our HVAC repair technicians help you get it just right. 

 

For any other HVAC servicing needs, visit  http://bit.ly/AC_Repair_VenturaCounty or call us at 805-737-2564.

 

CLSB #613652